Parameter Setting Reference
1. Device Tab Page

FAQ: How to choose GSM device?

Port Number: when the IR or blue tooth GSM device connects to your PC through virtual serial port, you should choose the virtual serial Port Number rather than IR port. 

COM Baudrate: please refer to your GSM device instruction manual, usually it would be 9600, 19200 or 57600.
FAQ: How to set Connection Mode and Port Number. 
Retry Interval(s): the waiting time before retrying when error sending message. Increase this value when you encounter errors in sending SMS in batch, and this will decrease the sending speed.
Retry Times: times of retry if sending message fails.
SMS Center Number: leave it blank if you have set it in your SIM Card. You can also set SMS Center number with your mobile phone.
PIN Code: leave it blank if your SIM card does not require PIN code.
Concatenated SMS Mode: use Concatenated SMS mode. 

FAQ: What is Concatenated SMS mode?

2. Database Tab Page

Connection: ADO connection string or ODBC DSN or OLE DB udl file.
User: database user name.
Password: user password.
Interval(s): the time interval for database querying. The smaller value means more promptly sending but heavier database load, and the larger value means less promptly sending but lighter database load.
SMSOut select SQL: to query messages need to be sent, among which <MSGID>,<PHONE>,<MSGBODY> are escape sequences, and no other value should be used.
SMSOut update SQL: to update the sent result to the database, among which <RESULT>,<MSGID> are escape sequences, and no other value should be used.
SMSIn insert SQL: to insert the received messages into the database, among which <PHONE>,<MSGBODY>,<TIME> are escape sequences, and no other value should be used.

How to: Configuration of Database

3. Message Tab Page

Sending period limit: set messages to be sent in specified period.
Start sending time: the start time for the sending period.
End sending time: the close time for the sending period.
DB Connection Lost Warning: when the database connection is broken, it will send warning message to the specified phone.
Send Daily Report: send report at specified time every day.
Report Time: time for sending the report message.
Battery Low Warning: send warning message to specified phone when battery level is low.

Start Service when OS starts: start SMS service when Operating System starts.

4. Information Tab Page

Manufacturer: the brand of GSM device.
Model: the Model of GSM device.
IMEI: the Sequence Number of GSM device.
Battery Level: current battery level of GSM device.
Signal Quality: current signal quality of GSM device.
Sent: accumulated sent messages.
Unsent: number of unsent messages in the database.
Received: accumulated received messages.
Failed: accumulated failed sending messages.

5. Gateway Tab Page

POP3 Server: Email server domain or IP address.

POP3 Account: Email account.
POP3 Password: account password.
POP3 Port: Email server POP3 port, default port is 110.
Query Interval: Polling interval, minimum value is 60s.

Test POP3: test the POP3 settings.

Email Content: send Email body to mobile phone.

Email Address: send Email sender address to mobile phone. If both Email Content and Email Address are unchecked, software only send Email subject to mobile phone.
Default Number: if Number Prefix string is not found in Email subject, the SMS will be sent to this number.
Number prefix: identifier string of the receptor number. If this string is not found in Email subject, the SMS will be sent to Default Number. At least one of Default Number and Number Prefix must be set to use Gateway functions.

6. About Tab Page

Device Code: hardware identify code of GSM device, which should be supplied during registration.
Registration Code: registration code you purchased.
Register: register the software with the registration code you purchased.
Order Online: Purchase the software online.