|
1. Search all devices
connected on PC. If you are using more than one USB GSM/GPRS modem you can only find several cable
names like "Prolific USB-to-Serial Bridge". It's
hard to identify them because they have same names.
With "SearchDevices" method of Kylix SMS .NET
Library the same cable names will be displayed as
device manufacturer and models like "SIEMENS MC35i"
or "Wavecom GPRS modem". If you are using
a 3G HSDPA stick as your SMS device you will find 3 to 4
COM ports, but only one port works correctly. You
have to try them all one by one. By using "SearchDevices"
method there is only one correct port name and
device name will show up. These pictures show how
useful of this feature.
 
Click to see
large images
2. SMS Send Counter. There
is a build-in SMS counter in Kylix SMS .NET Libray. It shows how many messages
have been sent since last reset time. You can reset the send number and reset
time. These two data are saved on SIM card. This would be useful if you want to
control the sending speed or count.
"101 messages have been sent since
10/01 by SIM card 25081251."
3. Get own phone
number of a SIM card. Some
devices support getting own number, you can get it very easily. But most devices
don't support ON memory, it means that you can't get the phone number of SIM
card. It will be a mass if you have 10 SIM cards. You may write the phone number
on those SIM cards, but how can you read it, if the SIM card is inserted in your
device. With "GetOwnNumber" method of Kylix SMS .NET Library you can easily get
the number by calling one simple method.
4. Full Unicode support. Kylix SMS .NET Library supports Unicode very well,
not only SMS text message but also WAPPus, vCard, vCalendar and USSD.
|
